Set up the PS VR2 Sense controller charging station

How to set up the PS VR2 Sense controller charging station

Find out how to charge your PlayStation VR2 Sense™ controllers using the PS VR2 Sense controller charging station.

How to charge using the PS VR2 Sense controller charging station

  1. Connect the supplied AC power cord (A) to the supplied AC adapter (B). 
  2. Connect the AC adapter (B) to the DC IN connector (C) on the charging station. Make all connections before plugging the AC power cord into an electrical outlet (D).

  1. Attach the charging adapters to the PlayStation VR2 Sense™ controllers.
    The left and right charging adapters are interchangeable.

  1. Attach each of the controllers to the charging station.
    With the charging adapters attached, insert each controller into the charging station’s connector.

  • The controller’s status indicator will slowly blink white and turn off when charging is complete.

  • Do not use the controllers while charging.

  • The charging station can charge a left and right controller at the same time.

How to remove controllers from the PS VR2 Sense controller charging station

  • Lift the controller out of the charging station to remove it.
  • You can still use the controller while the charging adapter is attached.

PS VR2 Sense controller charging time

  • It takes approximately 1.5 hours to fully charge the controllers when the battery has no remaining charge.

Need help? 

Contact our support specialists

Contact PlayStation Support