Learn how to get started with PlayStation®VR on PlayStation®5 consoles and PlayStation®4 consoles.
Before you get started
If you have purchased a new PS5™ console or PS4™ console alongside PlayStation VR (PS VR), set up your console first by following the on-screen instructions and then shut down the system before setting up PS VR.
PS VR: unboxing and set up
PS VR: get connected
PS VR: Play Area
PS VR on PS5 consoles
To play PS VR on your PS5 console, use the PlayStation®Camera adaptor. The adaptor is available free of charge. To find out more, please visit:
Connect the processor unit to your TV with the HDMI supplied with your console. If your console is connected to your TV unplug the HDMI from your console and plug it into the processor unit.
Connect the PlayStation Camera to your PS4 (PS5 console requires a PS Camera adaptor). The ideal height to place it is 1.4m (4’7”) from the floor.
Plug the HDMI (1) into the back of the console and the processor unit. If you are using another HDMI, check its packaging to make sure it’s at least HDMI 1.4.
Plug the USB cable (2) into the back of the processor unit and the front of your console.
Connect the AC power cord into the adaptor cable (3) and plug into the electricity supply.
Slide the processor unit connection cover back and plug in the VR connection cable (4).
Connect the VR headset (5) to the VR connection cable (4).
Switch on your TV and power up your console via the DUALSHOCK 4 or DualSense wireless controller.
Press the power button on the inline remote on the headset connection cable (5).
You may be prompted to update PlayStation VR Device Software at this stage.
You’re now ready to begin configuration. Follow the on-screen instructions.
We know you’re excited to get playing, but it’s really important to take your time with configuration to get the best possible gaming experience.
Camera configuration
Place the PS Camera about 1.4m (4’7”) high and about 2m (6’) away from where you will be sitting or standing.
Your TV will show an image of what the PS Camera can see. Angle it to make sure it’s not picking up the surface it’s on.
Position yourself where you will be playing VR, in the centre of the screen while you’re holding your DualShock 4 controller, PlayStation Aim, or PS Move controllers. This is important to make sure the PS Camera can place controllers in the right spot in the VR environment.
If you and the controllers were not in the centre of the screen when you hit ‘Continue’ or if more than one person was in the Play Area, you may need to repeat step 3.
If you’re still having problems adjusting the camera this could be because the room lighting is too bright. Find out how to set up your room for the best experience and try again.
To reconfigure the PS Camera:
PS5 console
Go to Settings > Accessories > PlayStation VR > Adjust PS Camera.
PS4 console
Go to Settings > Devices > PlayStation VR > Adjust PS Camera.
Almost there! Next, make sure that the headset is as comfortable as possible.
Switch the headset on (I).
If you are using earbuds put them on (making sure that left and right go in the correct ears!) and plug them into the stereo headphone jack (H). Be careful with the game volume to make sure it’s not too loud (K & L). Please note that Bluetooth earbuds and headphones are not compatible with PS VR - you must use wired earbuds or headphones.
Remove the plastic lens protectors before putting the headset on for the first time.
Hold the headset by the headband (A), not the scope (the bit with the blue lights), press the headband release button (E) and pull the front section forward.
Place the headset on your head and release the headband release button.
Tighten the headband using the adjustment dial (D) just enough to stop movement, but not so far that it feels too tight.
Adjust the scope position by carefully holding it around the edges and wiggling it until it’s comfortable and the image is as clear as possible.
If you are using over-ear headphones with a headband, put them on (making sure that left and right go on the correct ears!) and plug them into the stereo headphone jack (H). Be careful with the volume to make sure it’s not too loud (K & L). Please note that Bluetooth earbuds and headphones are not compatible with PS VR - you must use wired earbuds or headphones.
To remove the headset, press the headband release button (E) and re-extend the head band (A).
Lift the headset by the head band.
You can also find these instructions on your console:
PS5 console
Go to Settings > Accessories > PlayStation VR > Check How to Put On VR Headset
PS4 console
Go to Settings > Devices > PlayStation VR > Check How to Put On VR Headset.
Connect an existing HDMI cable between your TV and the HDMI (TV) port of your Processor Unit.
Connect the PlayStation Camera to your PS4 (PS5 console requires a PS Camera adaptor). The ideal height to place it is 1.4m (4’7”) from the floor.
Connect the HDMI cable (1) between your console and the HDMI port on the Processor Unit.
Connect the USB cable (2) between the front of your console and the rear of the Processor Unit.
Connect the AC power cord into the AC adaptor, and plug the adaptor cable (3) into the rear of the Processor Unit. Now safely plug the power cord into an electricity supply.
Connect the PlayStation VR headset cable (4) into the Processor Unit matching the symbols displayed.
You can now connect your stereo headphones into the PlayStation VR headset.
Switch on your TV and power up your console by holding down the PS button on the DUALSHOCK 4 controller.
Press the power button (A) located on the underside of the PlayStation VR headset scope. When the headset is turned on, the tracking lights on the rear will glow blue (B).
You’re now ready to begin the headset configuration. Follow the on-screen instructions for the best results, but you can also follow the steps below.
Place the PS Camera about 1.4m (4’7”) high and about 2m (6’) away from where you will be sitting or standing.
Your TV will show an image of what the PS Camera can see. Angle it to make sure it’s not picking up the surface it’s on.
Position yourself where you will be playing VR, in the centre of the screen while you’re holding your DUALSHOCK 4 or DualSense wireless controller, PlayStation Aim, or PS Move controllers. This is important to make sure the PS Camera can place controllers in the right spot in the VR environment.
If you and the controllers were not in the centre of the screen when you hit ‘Continue’ or if more than one person was in the Play Area, you may need to repeat step 3.
If you’re still having problems adjusting the camera this could be because the room lighting is too bright. To reconfigure the PS Camera:
PS5 console
Go to Settings > Accessories > PlayStation VR > Adjust PS Camera.
PS4 console
Go to Settings > Devices > PlayStation VR > Adjust PS Camera.
Switch the headset on using the power button (J) on the underside of the headset scope.
If you are using the stereo in-ear headphones, plug them into the stereo headphone jack (H) and connect the headphone attachment to the headphone attachment hole (I).
Remove the plastic lens protectors before putting the headset on for the first time.
Hold the headset by the top of the headband (A), press the headband release button (E) and pull the front section forward.
Place the headset on your head and release the headband release button.
Tighten the headband using the adjustment dial (D) just enough to stop movement, but not so far that it feels too tight.
Adjust the scope position by carefully holding it around the edges and wiggling it until it’s comfortable and the image is as clear as possible.
If you are using over-ear headphones with a headband, put them on (making sure that left and right go on the correct ears) and plug them into the stereo headphone jack (H). You can adjust the volume using the buttons (N & P) on the underside of the headset scope. Please note that Bluetooth earbuds and headphones are not compatible with PS VR - you must use wired earbuds or headphones.
To remove the headset, press the headband release button (E) and re-extend the head band (A).
Lift the headset by the head band.
You can also find these instructions on your console:
PS5 console
Go to Settings > Accessories > PlayStation VR > Check How to Put On VR Headset.
PS4 console
Go to Settings > Devices > PlayStationVR > Check How to Put On VR Headset.
You can wear the VR headset over your glasses but take care when adjusting the scope. Having your glasses touch the lens could result in damage to your glasses, VR headset lens or both. Do not push in or pull out the scope excessively.
If you notice that PS VR environments are unclear or fuzzy while you’re wearing your glasses, try taking them off and readjust the scope position before you start play. Try playing with and without your glasses to find out what works best for you.
Having issues?
Please visit PlayStation Repairs for troubleshooting steps.
